Latest posts
Single area OSPF routing protocol configuration is a very simple setup that can help improve network availability in your network. OSPF (Open Shortest Path First)...
How to setup a Cisco ASA Active/Standby Failover
Two Cisco ASA firewalls in high availability mode are highly recommended in a production scenario....
How to configure Cisco ASA site to site VPN IKEv1
This lab will walk you through how to setup a cisco asa vpn connection between 2 cisco ASA firewalls using IKEv1...
How to configure VRF-lite using Cisco Routers & Switches
For service providers to help support multiple customers, they must be able to virtualize the router to create multiple virtual routing tables using VRF...
How to configure Etherchannel load balancing
LACP and PAgP support a variety of load balancing algorithms to help maintain even distribution of traffic across an Etherchannel bundle. In this lab we...
Etherchannel Configuration Guide using LACP or PAgP
The Etherchannel Configuration implemented in this guide will explore various methods of Link Aggregation, which will combine the connections into single logical channel group. Port...
How To Configure Cisco VLAN Trunking Protocol Version 3
I covered the fundamentals of Cisco VLAN Trunking Protocol in a previous article (version 1 and 2). VTP version 3‘s primary purpose is to synchronize...
Ultimate VLAN Trunking Protocol V2 setup Guide
VLAN Trunking protocol (VTP) manages the addition, deletion, and renaming of VLANs on the entire network from a single switch. Although not used as common...
How to setup Multiple Spanning Tree Protocol
Multiple Spanning Tree protocol (MST) is an open protocol derived from rapid spanning tree protocol. MSTP runs a number of VLAN-independent STP instances (representing logical...
(STP) Spanning Tree Protocol Explained – advanced tuning
The (STP) Spanning Tree Protocol Explained in simple terms is a link management protocol that enables path redundancy while also preventing undesired network loops. As...